<?xml version="1.0" encoding="iso-8859-1" ?>
<rss version="2.0">
   <channel>
      <title>PointedThree - W164 &amp; W166 M-Class</title>
      <link>http://pointedthree.com</link>
      <description>PointedThree - W164 &amp; W166 M-Class</description>
<item>
<title>GLE frees itself from sand</title>
<link>http://pointedthree.com/disc/forums/showthread.asp?tid=23914</link>
<description><![CDATA[Here is a link to the GLE getting out of sand. <br /><br />https://mbworld.org/articles/mercedes-suv-gle-sand-dune/?utm_source=jan16&amp;utm_medium=email&amp;utm_campaign=content]]></description>
</item>
<item>
<title>Electric Trailer Brakes for W164</title>
<link>http://pointedthree.com/disc/forums/showthread.asp?tid=23779</link>
<description><![CDATA[We can offer you an Electronic Brake Controller Harness for your W164 ML<br /><br />Not offered by Mercedes-Benz, but available at G-wagenaccessories.com<br /><br />https://www.g-wagenaccessories.com/products/electric-trailer-brake-controller<br /><br />BTW, this is our first post in 2018 here in the ML section.......anybody awake?<br /><br />Thank you  :biggrin:]]></description>
</item>
<item>
<title>2012 W166 ML250 Blutec</title>
<link>http://pointedthree.com/disc/forums/showthread.asp?tid=23460</link>
<description><![CDATA[I have a 2012 W166 ML250 Bluetec and I need to remove and replace the rear air vent - cuurent blades are missing / damaged and I have a replacement unit. Anyone know how to remove the plastic frame around the vent unit?   :confuzed:]]></description>
</item>
<item>
<title>2006 ML500</title>
<link>http://pointedthree.com/disc/forums/showthread.asp?tid=23493</link>
<description><![CDATA[A couple of blue m113 powered beasts.<br />Like father like son.]]></description>
</item>
<item>
<title>&#39;06 ML 350 front diff gone at 59k</title>
<link>http://pointedthree.com/disc/forums/showthread.asp?tid=18640</link>
<description><![CDATA[I&#39;ve been experiencing subtle front driveline noise on my &#39;06 ML350 for the last 10k miles or so.  Just a low &quot;grinding&quot; from 25 mph on up.  Load or turning don&#39;t seem to chane it.  Finally took it to the dealer a couple weeks ago.  Tech couldn&#39;t hear anything.  Took the shop foreman for a drive, and he confirmed what I was hearing but did not know what it was and they did not get to work on the vehicle that day.  Took the service manager for a ride this morning, and he confirmed the noise and said they would check the wheel bearing and change the transfer case fluid.<br /><br />Well, got the call this afternoon, and they said they found metal shavings in the front diff fluid and think it is bad.  Researching this I found 8-10 other case of mostly &#39;06s going out before 60k miles.  Dealer offered to pay 1/2 the parts, still leaving me with about a $3k bill.  Contacte MBUSA today and they have assigned a case manager to it - said I would hear back in 24 hours.  I&#39;d be okay with a 1/3 split shared by me, the dealer and MB.  We&#39;ll see.<br /><br />I need to sell this car in a few months to get a &#39;12, but I want it to be in good shape.  This was the very first W164 delivered in Oregon (I had the first W163 as well).  Guess I&#39;m brave or stupid!  Extended warranty will be more appealing on the next one!]]></description>
</item>
<item>
<title>2008 W 164 Recall</title>
<link>http://pointedthree.com/disc/forums/showthread.asp?tid=20081</link>
<description><![CDATA[Today I received an &quot;Urgent Recall Notice&quot; from my dealer saying it is the recall #2012070002 Cam Solenoid. Does anyone receive similar recall notice ?   :(]]></description>
</item>
<item>
<title>Compatibility of W164 Seats to W163?</title>
<link>http://pointedthree.com/disc/forums/showthread.asp?tid=23035</link>
<description><![CDATA[So my W163&#39;s seats are tired and suffer from worn bolsters and have  cracked lines in the front seats.  I&#39;m thinking my best option is to find newer seats from a W164 to put in mine.  The only question I have is around compatibility.  Is this a bolt-on upgrade where the seats will attach to the W163 rails?<br /><br /><br />Robert]]></description>
</item>
<item>
<title>Permanently turn off service reminder?</title>
<link>http://pointedthree.com/disc/forums/showthread.asp?tid=16364</link>
<description><![CDATA[Is there a way to permanently turn off the service reminder?  I service the vehicle more frequently than required by that thing and I hate having to have it reset all the time.<br /><br />DjM]]></description>
</item>
<item>
<title>Rear Bumper Parking Sensor</title>
<link>http://pointedthree.com/disc/forums/showthread.asp?tid=22127</link>
<description><![CDATA[<br /> My 2 year old son used his little fingers and pushed the little button on the bumper of my wife&#39;s 2007 ML350 CDI. Now none of the parking sensors are working all of the way around the truck. <br /> Is there anything special that I need to know? Can I simply re-attach it? By the looks of it, I have to remove the rear bumper to get access to it. <br /> Do any of you have the removal instructions for the rear bumper?<br />  ]]></description>
</item>
<item>
<title>2006 ml320 (w164) front bumper cover removal</title>
<link>http://pointedthree.com/disc/forums/showthread.asp?tid=21876</link>
<description><![CDATA[Hi to all, I&#39;m a newbie and this is my first post on any site, so if I do anything stupid or use the site incorrectly please tell me.<br />As stated in the subject, can anyone help me with the procedure for removing the front bumper cover. I have 4 parking sensors gone and would like to try and replace them myself. Any advice would be greatly appreciated.<br /><br />Regards to all,<br /><br />Mal.]]></description>
</item>
<item>
<title>166 ML250CDI Buetec</title>
<link>http://pointedthree.com/disc/forums/showthread.asp?tid=19838</link>
<description><![CDATA[I was wondering if the US have been offered the baby (for SA) entry level ML250CDI BT?  It is a 2.1l 4 pot turbo diesel that makes 150kW and 500Nm and uses between 6-6.5l/100km.  The prices are quite attractive compared to the larger cc and higher spec models on offer.  Went and had a look at them as they have only been recently launched here.  Quality seems to be way up on the 163 that I used to have.]]></description>
</item>
<item>
<title>2014 ML350BlueTEC Delivered</title>
<link>http://pointedthree.com/disc/forums/showthread.asp?tid=21451</link>
<description><![CDATA[Just took delivery yesterday, fresh from the factory.]]></description>
</item>
<item>
<title>order guide</title>
<link>http://pointedthree.com/disc/forums/showthread.asp?tid=20827</link>
<description><![CDATA[Does anyone know if the 2014 Canadian dealer order guide has made it online yet? I can&#39;t seem to find it. Thanks.]]></description>
</item>
<item>
<title>ML Traded</title>
<link>http://pointedthree.com/disc/forums/showthread.asp?tid=15366</link>
<description><![CDATA[<br />The 2007 ML 320 CDI has been traded. I&#39;ll keep the G500 for a while until I&#39;m 100% sure of the new ride, which should be here in 3-4 weeks.]]></description>
</item>
<item>
<title>New 2013 ML 350 Dipstick</title>
<link>http://pointedthree.com/disc/forums/showthread.asp?tid=20592</link>
<description><![CDATA[Maybe I&#39;m the Dipstick, but there is an Orange-red dipstick located at the drivers side to the rear of the engine.<br />Being the only one visible I thought because of the location it was the tranny stick.<br />WRONG!<br />After reading the web info, turns out that is the engine dipstick.<br />There is no Tranny stick.<br />The Tranny is changed at 70K miles using a computer to monitor it when filled.<br />What happened too simplicity?]]></description>
</item>

   </channel>
</rss>
