Welcome Guest. ( logon | register )   
FAQ Member List Albums Today's Posts Search

PointedThree :  Community forums : General Mercedes-Benz Discussions : The Complete Injection Molding Process

Page 1 of 1 1
The Complete Injection Molding Process
Topic Tools Message Format
Author
Posted 9/20/2013 5:02 AM
infozetar
New user


Date registered: Sep 2013
Location:
Vehicle(s):
Posts: 1

The Complete Injection Molding Process

The two most popular kinds of IMM are the single-stage and the two-stage; there are also injection moulding units with three or more stages. The single-stage IMM is also known as the reciprocating-screw IMM. The two-stage IMM also has other names, such as the piggyback IMM. It is comparable in some ways to a continuous extruder.
The IMM has three basic components: the injection unit, the mold, and the clamping system. The injection molding unit, also called the plasticator, prepares the proper plastic melt and via the injection unit transfers the melt into the next component that is the mold.
  The clamping system closes and opens the mold.
#217218
Top of the page Bottom of the page
« View previous thread :: View next thread »
Page 1 of 1 1
Forum Jump :
All times are EST.  The time is now 6:28:30 AM.

Execution: 0.158 seconds, 74 cached, 26 executed.