|Welcome Guest. ( logon | register )|
|Topic Tools||Message Format|
Date registered: Nov 2014
Location: Los Angeles
Vehicle(s): 2005 G55, 1985 300tdt
|om617.952 WIS for timing chain tensioner rail removal|
Is it possible to remove the tensioner rail with the head on the motor, or will it not come out through the head open8ng?
Also, do I need to remove the main crank pulley to get the retaining bolt out?
I am not talking about the one on the other side with the slide rail pin. The one I am talking about is curved and pushes against the chain to tension the chain.
Edited by atg 5/31/2015 12:14 PM
Date registered: Sep 2006
Location: Federal Heights, CO
Vehicle(s): 1980 240D 3.0VNT
|RE: om617.952 WIS for timing chain tensioner rail removal|
The banana rail can be removed with the head on. The crank pulley and idler sprocket (in the head) must be removed to extract the retaining pin.
|#231778 - in reply to #228404|
|« View previous thread :: View next thread »|