Welcome Guest. ( logon | register )   
FAQ Member List Albums Today's Posts Search

PointedThree :  Sedan Forums : W210 E Class : Photo DIY- Flex Discs and Center Support Bearing R & R

Page 1 of 1 1
Photo DIY- Flex Discs and Center Support Bearing R & R
Topic Tools Message Format
Author
Posted 6/5/2016 11:24 PM
G-AMG
G-Class DIY Host




Date registered: May 2006
Location: South Texas
Vehicle(s): '04 G55, '80 280GE, '99 S420, '98 E320, 2011 E350
1000
Photo DIY- Flex Discs and Center Support Bearing R & R

Well, it was a "Trifecta" of Slightly 'Firmer' shifts, Some Marginal Cracks in the Discs after 19 Years & 186,000 Miles, and the Nail in the Coffin? I found the Torn Sliding Spline Section Boot sitting on my Garage floor.

Soo? Time to get to it!


THEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE Most Important thing to remember is MARKING THE ENTIRE SHAFT/DISC/FLANGE(Front & Rear)/DIFFERTENTIAL-TRANSMISSION-BODIES Orientation!!

These Shafts are Balanced as a Whole, it is it 100% Imperative the ENTIRE Complex gets put back together AS IT DID IN THE FACTORY.


I must say, After the repair? The car shifts better, and is much Smoother at highway speeds. I guess the Rubber gets hard after soooo many years!

G



(1.jpg)



(2.jpg)



(3.jpg)



(4.jpg)



(5.jpg)



(6.jpg)



(7.jpg)



(8.jpg)



(9.jpg)



(10.jpg)



(11.jpg)



(12.jpg)



(13.jpg)



(14.jpg)



(15.jpg)



(16.jpg)



(17.jpg)



(18.jpg)



(19.jpg)



(20.jpg)



(21.jpg)



(22.jpg)



(23.jpg)



(24.jpg)



(25.jpg)



(26.jpg)



(27.jpg)



(28.jpg)



(29.jpg)



(30.jpg)



(31.jpg)



(32.jpg)



(33.jpg)



(34.jpg)



(35.jpg)



(36.jpg)



Attachments
----------------
Attachments 1.jpg (112KB - 0 downloads)
Attachments 2.jpg (133KB - 0 downloads)
Attachments 3.jpg (132KB - 0 downloads)
Attachments 4.jpg (121KB - 0 downloads)
Attachments 5.jpg (83KB - 0 downloads)
Attachments 6.jpg (121KB - 0 downloads)
Attachments 7.jpg (129KB - 0 downloads)
Attachments 8.jpg (133KB - 0 downloads)
Attachments 9.jpg (80KB - 0 downloads)
Attachments 10.jpg (79KB - 0 downloads)
Attachments 11.jpg (104KB - 0 downloads)
Attachments 12.jpg (82KB - 0 downloads)
Attachments 13.jpg (72KB - 0 downloads)
Attachments 14.jpg (87KB - 0 downloads)
Attachments 15.jpg (114KB - 0 downloads)
Attachments 16.jpg (103KB - 0 downloads)
Attachments 17.jpg (90KB - 0 downloads)
Attachments 18.jpg (98KB - 0 downloads)
Attachments 19.jpg (63KB - 0 downloads)
Attachments 20.jpg (90KB - 0 downloads)
Attachments 21.jpg (90KB - 0 downloads)
Attachments 22.jpg (91KB - 0 downloads)
Attachments 23.jpg (116KB - 0 downloads)
Attachments 24.jpg (77KB - 0 downloads)
Attachments 25.jpg (89KB - 0 downloads)
Attachments 26.jpg (78KB - 0 downloads)
Attachments 27.jpg (101KB - 0 downloads)
Attachments 28.jpg (116KB - 0 downloads)
Attachments 29.jpg (134KB - 0 downloads)
Attachments 30.jpg (103KB - 0 downloads)
Attachments 31.jpg (99KB - 0 downloads)
Attachments 32.jpg (108KB - 0 downloads)
Attachments 33.jpg (111KB - 0 downloads)
Attachments 34.jpg (92KB - 0 downloads)
Attachments 35.jpg (78KB - 0 downloads)
Attachments 36.jpg (107KB - 0 downloads)
#232624
Top of the page Bottom of the page
Author
Posted 6/6/2016 2:01 AM
jmr89



Date registered: Nov 2012
Location: France
Vehicle(s): Class G W463 320Cab V6 >>Ancien 230 GE Cab 1990
100
RE: Photo DIY- Flex Discs and Center Support Bearing R & R


  Great    
#232628 - in reply to #232624
Top of the page Bottom of the page
Author
Posted 6/6/2016 12:21 PM
Eyes
Member


Date registered: Nov 2007
Location: California
Vehicle(s): 2000 E320
Posts: 8

Re: Photo DIY- Flex Discs and Center Support Bearing R & R

Wow ...... Thanks for sharing ...................
#232641 - in reply to #232624
Top of the page Bottom of the page
Author
Posted 6/6/2016 3:56 PM
riaanharman
Regular


Date registered: Jan 2009
Location: South Africa
Vehicle(s): 2012 - G300 Professional / 1984 - 300GD
Posts: 79
50
Re: Photo DIY- Flex Discs and Center Support Bearing R & R

Unreal !! Thanks a mil , always enjoying your technical posts.
#232650 - in reply to #232624
Top of the page Bottom of the page
« View previous thread :: View next thread »
Page 1 of 1 1
Forum Jump :
All times are EST.  The time is now 2:28:10 PM.

Execution: 0.25 seconds, 71 cached, 33 executed.