Welcome Guest. ( logon | register )   
FAQ Member List Albums Today's Posts Search

PointedThree :  Sedan Forums : W140 S Class : Photo DIY- Flex Discs & Center Support Bearing Overhaul

Page 1 of 1 1
Photo DIY- Flex Discs & Center Support Bearing Overhaul
Topic Tools Message Format
Author
Posted 6/7/2016 12:35 AM
G-AMG
G-Class DIY Host




Date registered: May 2006
Location: South Texas
Vehicle(s): '04 G55, '80 280GE, '99 S420, '98 E320, 2011 E350
1000
Photo DIY- Flex Discs & Center Support Bearing Overhaul

Since I have noticed slightly 'firm' Shifting lately, and mile Harshness during Acceleration/Deceleration... I thought I would change out the Old, HARD, Rubber bits.

Thank goodness I DID... On VISUAL Inspection, the Cracks looked small, and FINE in size. No BRIDGING Cracks between the webs. After 18 Years and 185,000 miles, they were due!

THEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE Most Important thing to remember is MARKING THE ENTIRE SHAFT/DISC/FLANGE(Front & Rear)/DIFFERTENTIAL-TRANSMISSION-BODIES Orientation!!

These Shafts are Balanced as a Whole, it is it 100% Imperative the ENTIRE Complex gets put back together AS IT DID IN THE FACTORY.


I must say, After the repair? The car shifts better, and is much Smoother at highway speeds. I guess the Rubber gets hard after soooo many years!

G



(1.jpg)



(2.jpg)



(3.jpg)



(4.jpg)



(5.jpg)



(6.jpg)



(7.jpg)



(8.jpg)



(9.jpg)



(10.jpg)



(11.jpg)



(12.jpg)



(13.jpg)



(14.jpg)



(15.jpg)



(16.jpg)



(17.jpg)



(18.jpg)



(19.jpg)



(20.jpg)



(21.jpg)



(22.jpg)



(23.jpg)



(24.jpg)



(25.jpg)



(26.jpg)



(27.jpg)



(28.jpg)



(29.jpg)



(30.jpg)



(31.jpg)



(32.jpg)



(33.jpg)



(34.jpg)



(35.jpg)



(36.jpg)



(37.jpg)



(38.jpg)



(39.jpg)



(40.jpg)



(41.jpg)



Attachments
----------------
Attachments 1.jpg (120KB - 0 downloads)
Attachments 2.jpg (113KB - 0 downloads)
Attachments 3.jpg (140KB - 0 downloads)
Attachments 4.jpg (94KB - 0 downloads)
Attachments 5.jpg (96KB - 0 downloads)
Attachments 6.jpg (103KB - 0 downloads)
Attachments 7.jpg (78KB - 0 downloads)
Attachments 8.jpg (98KB - 0 downloads)
Attachments 9.jpg (112KB - 0 downloads)
Attachments 10.jpg (79KB - 0 downloads)
Attachments 11.jpg (85KB - 0 downloads)
Attachments 12.jpg (132KB - 0 downloads)
Attachments 13.jpg (84KB - 0 downloads)
Attachments 14.jpg (90KB - 0 downloads)
Attachments 15.jpg (113KB - 0 downloads)
Attachments 16.jpg (110KB - 0 downloads)
Attachments 17.jpg (119KB - 0 downloads)
Attachments 18.jpg (82KB - 0 downloads)
Attachments 19.jpg (75KB - 0 downloads)
Attachments 20.jpg (94KB - 0 downloads)
Attachments 21.jpg (63KB - 0 downloads)
Attachments 22.jpg (90KB - 0 downloads)
Attachments 23.jpg (127KB - 0 downloads)
Attachments 24.jpg (82KB - 0 downloads)
Attachments 25.jpg (88KB - 0 downloads)
Attachments 26.jpg (70KB - 0 downloads)
Attachments 27.jpg (119KB - 0 downloads)
Attachments 28.jpg (74KB - 0 downloads)
Attachments 29.jpg (106KB - 0 downloads)
Attachments 30.jpg (105KB - 0 downloads)
Attachments 31.jpg (86KB - 0 downloads)
Attachments 32.jpg (61KB - 0 downloads)
Attachments 33.jpg (121KB - 0 downloads)
Attachments 34.jpg (105KB - 0 downloads)
Attachments 35.jpg (91KB - 0 downloads)
Attachments 36.jpg (95KB - 0 downloads)
Attachments 37.jpg (114KB - 0 downloads)
Attachments 38.jpg (72KB - 0 downloads)
Attachments 39.jpg (99KB - 0 downloads)
Attachments 40.jpg (89KB - 0 downloads)
Attachments 41.jpg (111KB - 0 downloads)
#232662
Top of the page Bottom of the page
« View previous thread :: View next thread »
Page 1 of 1 1
Forum Jump :
All times are EST.  The time is now 7:04:17 AM.

Execution: 0.169 seconds, 75 cached, 26 executed.