Welcome Guest. ( logon | register )   
FAQ Member List Albums Today's Posts Search

PointedThree :  Vans, Trucks, SUVs and Other Forums : G-Class : Seat back panel installation?

Page 1 of 1 1
Seat back panel installation?
Topic Tools Message Format
Author
Posted 4/20/2019 8:23 PM
Fred V
Regular


Date registered: Apr 2014
Location: Green Mnts
Vehicle(s): 02 G500
Posts: 88
50
Seat back panel installation?


The back panel of the front passenger seat has come off and am struggling to get the thing back on. One of the two plastic fasteners (arms?) at the top of the panel had broken and some one had stuck the panel in place with some double sided tape and one of the two bottom screws. Eventually the panel came loose. I ordered a new top fastener and installed that but when I now try to replace the panel I have a hard time getting the two screws at the bottom of the panel to line up with the holes in the seat frame. Is there some nifty trick to get the panel back on or is it just a matter of fumbling until the screws happen to land in the holes?
Thank you.
#240617
Top of the page Bottom of the page
Author
Posted 4/20/2019 8:52 PM
DUTCH
Administrator Doppelgänger




Date registered: Apr 2006
Location: US, GA, Atlanta
Vehicle(s): 2015 Audi Q7 3.0 TDI,2018 Sprinter
Posts: 9963
5000
RE: Seat back panel installation?

On my 2000 G500, the seat back just slides up into place from below, and the screws go right into the holes.
#240618 - in reply to #240617
Top of the page Bottom of the page
« View previous thread :: View next thread »
Page 1 of 1 1
Forum Jump :
All times are EST.  The time is now 10:09:29 PM.

Execution: 0.218 seconds, 92 cached, 9 executed.