Welcome Guest. ( logon | register ) | ||||||
|
|
|
| Topic Tools | Message Format |
Author |
| ||
The_Analyst Member Date registered: May 2012 Location: GA Vehicle(s): 2003 G500 x2 Posts: 13 | Replacing 2003 G500 side mirror turn signal Hi, Are there any instructions on removing the side mirror turn signal? The glass is broken and I want to replace it with a new one, but I can’t figure out how to get to it... Thank you. | ||
#241303 | |||
Author |
| ||
DUTCH Administrator Doppelgänger Date registered: Apr 2006 Location: US, GA, Atlanta Vehicle(s): 2015 Audi Q7 3.0 TDI,2018 Sprinter Posts: 9963 | RE: Replacing 2003 G500 side mirror turn signal Is it the mirror that's broken? It's a replaceable part. Where is GA are you located. Depending on where you are, someone might be able to help you. | ||
#241304 - in reply to #241303 | |||
Author |
| ||
The_Analyst Member Date registered: May 2012 Location: GA Vehicle(s): 2003 G500 x2 Posts: 13 | RE: Replacing 2003 G500 side mirror turn signal Hi. I’m in Savannah. The turn signal indicator assembly glass is broken. Part number 203-820-13-21. I just need to get behind the mirror. I tried to remove the mirror but everything in that area is very brittle and I don’t want to break anything important. Thanks. | ||
#241305 - in reply to #241304 | |||
Author |
| ||
AlanMcR Expert Date registered: Apr 2006 Location: US, CA, Los Altos Vehicle(s): G300DT E300DT 230SL Posts: 3500 | RE: Replacing 2003 G500 side mirror turn signal If these mirror assemblies are anything like the earlier ones, the easiest thing to do is just break the brittle clips holding on the mirror. Then reassemble with RTV. The RTV will hold it forever until you pull hard enough to tear the RTV. | ||
#241306 - in reply to #241305 | |||
Author |
| ||
bnZE430/1999 Member Date registered: Dec 2016 Location: SF Bay Area Vehicle(s): 2002 G500 w463 Posts: 30 | Re: Replacing 2003 G500 side mirror turn signal The mirror on my 2002 had little plastic fingers that held it on. You pull hard enough and the mirror comes off. | ||
#241382 - in reply to #241304 | |||
« View previous thread :: View next thread » |
|
|