Welcome Guest. ( logon | register )   
FAQ Member List Albums Today's Posts Search

PointedThree :  Coupe and Convertible Forums : W208 CLK Class : Drivers window 2001 clk cab

Page 1 of 1 1
Drivers window 2001 clk cab
Topic Tools Message Format
Author
Posted 5/28/2007 3:17 AM
Bill K

Date registered: Dec 1899
Location:
Vehicle(s):
Drivers window 2001 clk cab

Hi I have a drivers window going up all the way then returning about 5 cm down to a open position. this is when the door is closed.
If I open the door and close the window it works fine and air thight.
Any ideas where to start.
#75904
Top of the page Bottom of the page
Author
Posted 5/29/2007 8:32 PM
Marsden
Classic MB




Date registered: Apr 2006
Location: Capital City USA
Vehicle(s): Mercedes-Benz
5000
RE: Drivers window 2001 clk cab

If it were just a couple centimeters, I'd think it was the door-closing clearance feature acting up.

As it is, not sure, but the 209 and 211 have an all-up/all-down programming feature which can be reset via the key fob, per your manual.

Sometimes resetting that can cure problems such as you are having.

Just throwing out an idea or two here..  

#76266 - in reply to #75904
Top of the page Bottom of the page
Author
Posted 5/29/2007 8:40 PM
AsianML

Date registered: Dec 1899
Location:
Vehicle(s):
Re: Drivers window 2001 clk cab

Could also be the pinch protection overreacting. The seals or whatever could be a little "tight" making the system think something is caught between the window and door.

Same thing would happen with the ML a while back. Since then it hasn't happened.
#76267 - in reply to #76266
Top of the page Bottom of the page
Author
Posted 5/30/2007 4:09 AM
Bill K

Date registered: Dec 1899
Location:
Vehicle(s):
RE: Drivers window 2001 clk cab

Thanks guys, I will look in to the two ideas, and report back the out come .
Thanks agian
#76311 - in reply to #75904
Top of the page Bottom of the page
Author
Posted 5/30/2007 8:38 PM
jtbeche

Date registered: Dec 1899
Location:
Vehicle(s):
RE: Drivers window 2001 clk cab

I was always under the impression that you just need to reset the windows.  In other words, press the button to roll the window down but not using the express function, then once down click all the way on the button and hold down for a few seconds.  The do the same up.  See if that helps.
#76525 - in reply to #75904
Top of the page Bottom of the page
« View previous thread :: View next thread »
Page 1 of 1 1
Forum Jump :
All times are EST.  The time is now 3:35:02 AM.

Execution: 0.188 seconds, 71 cached, 29 executed.