|Welcome Guest. ( logon | register )|
|Topic Tools||Message Format|
G-Class DIY Host
Date registered: May 2006
Location: South Texas
Vehicle(s): '04 G55, '80 280GE, '99 S420, '98 E320, 2011 E350
|Photo DIY- Camshaft Adjuster Solenoid Re-Sealing|
Wow.. when I rains? It POURS!!
It has been "Leaking Oil on the Garage Floor, Central" at my house. Between the Leaking M112 (W210) and the M113 (W463) Valve/Breather Covers, and now the M119 (W140)? This is becoming my new Full-Time job... :^(
Anyhoooo, apparently this is a very Common Oil Leaking location on these Engines.
This is a REALLY Easy DIY solution.
Please note: The Specified Sealant 001 989 89 20 10, apparently is the EXACT same thing as Loctite 574. The price difference between the Two? Negligible.
Be sure to let the Sealant Cure completely BEFORE starting the Motor. It looks from the Curing Charts that 24 hours (at a 22C shop temp) is a good interval.
This Post will apply to those E420, W210 Owners.
1.jpg (179KB - 0 downloads)
2.jpg (135KB - 0 downloads)
3.jpg (129KB - 0 downloads)
4.jpg (97KB - 0 downloads)
5.jpg (101KB - 0 downloads)
6.jpg (93KB - 0 downloads)
7.jpg (123KB - 0 downloads)
8.jpg (99KB - 0 downloads)
9.jpg (97KB - 0 downloads)
10.jpg (80KB - 0 downloads)
11.jpg (66KB - 0 downloads)
12.jpg (80KB - 0 downloads)
13.jpg (110KB - 0 downloads)
|« View previous thread :: View next thread »|