hipine
Date registered: Jul 2006 Location: US, CO, Bailey Vehicle(s): 460 1980 280GE w. 617A
| RE: 87 280GE with OM 617A issues
Polvoson - 10/22/2017 2:04 PM
Hmmmm This line you speak of...
I just checked. I have no lines leading from the top of the intake manifold to the IP.
Could you please take a pic and post?
The picture kmaser posted below shows a yellow arrow pointing to the place the pressure line should enter the ALDA on top of the injection pump. You should find a banjo fitting at the rear end of the intake manifold. You can route a line directly from that banjo fitting at the rear of the manifold to this fitting on the ALDA to see if that makes it run better.
-Dave G. |