Welcome Guest. ( logon | register ) | ||||||
|
|
|
| Topic Tools | Message Format |
Author |
| ||
G-AMG G-Class DIY Host Date registered: May 2006 Location: South Texas Vehicle(s): '04 G55, '80 280GE, '99 S420, '98 E320, 2011 E350 | PHOTO DIY- SPARK PLUG CHANGE Greetings all. Even though it looks as if no one even visits this section, I'll go ahead and post anyway, the procedure for spark plug removal for '98 E320. It is a bit of a chore, but no real tricks involved. Just lots-o-tight spaces. You will need a few special tools, including a slim profile spark plug socket. I used a Stahlwille socket#51, a 16mm socket with rubber insert. A T27 Torx bit and a Low Range torque wrench (for the Torx screws- 8Nm), and a regular range torque wrench for the Spark Plugs (28 Nm). Another tool that made the job easy, was MB part# 110 589 01 01 00, aka Hazet # 2771. Lucky me, it happens to be the same tool used to adjust the valves on the Old 280GE. Two for the price of one! You can actually find those floating around on Ebay for cheap. It is worth every penny for this job. You use the wrench to pry the spark wire off the plug. Other helpful items were 3" and 5" extensions, and a U-Joint. In all, it took around 3 hours. A preatty straight forward procedure. Although the coils and plug/block areas ARE marked with A & B, I was paranoid, and just did one plug/plug wire at a time, JUST IN CASE! (1.JPG) (2.JPG) (3.JPG) (4.JPG) (5.JPG) (5A.JPG) (6.JPG) (7.JPG) (8.JPG) (8A.JPG) (9.JPG) (91.JPG) (92.JPG) (93.JPG) (94.JPG) (95.JPG) (96.JPG) (97.JPG) (98.JPG) (99.JPG) (991.JPG) (992.JPG) (993.JPG) (994.JPG) Attachments ---------------- 1.JPG (212KB - 33 downloads) 2.JPG (149KB - 22 downloads) 3.JPG (180KB - 22 downloads) 4.JPG (155KB - 16 downloads) 5.JPG (161KB - 16 downloads) 5A.JPG (158KB - 15 downloads) 6.JPG (157KB - 16 downloads) 7.JPG (196KB - 16 downloads) 8.JPG (150KB - 14 downloads) 8A.JPG (139KB - 13 downloads) 9.JPG (135KB - 16 downloads) 91.JPG (113KB - 20 downloads) 92.JPG (154KB - 15 downloads) 93.JPG (136KB - 15 downloads) 94.JPG (152KB - 17 downloads) 95.JPG (161KB - 14 downloads) 96.JPG (124KB - 13 downloads) 97.JPG (156KB - 12 downloads) 98.JPG (125KB - 14 downloads) 99.JPG (138KB - 13 downloads) 991.JPG (131KB - 12 downloads) 992.JPG (221KB - 12 downloads) 993.JPG (160KB - 12 downloads) 994.JPG (173KB - 14 downloads) | ||
#54407 | |||
Author |
| ||
Darkmann Date registered: Dec 1899 Location: Vehicle(s): | Re: PHOTO DIY- SPARK PLUG CHANGE Great picture post. And yes, some do visit here every so oftem - usually when it's near maintenance time. Thanks for the post. I'm sure it'll come in handy when I'm ready for plug replacement. | ||
#67252 - in reply to #54407 | |||
Author |
| ||
storm Date registered: Dec 1899 Location: Vehicle(s): | Re: PHOTO DIY- SPARK PLUG CHANGE another great post! adding to the DIY/FAQ section for sure: http://www.pointedthree.com/disc/forums/showthread.php?tid=743&post... | ||
#67290 - in reply to #54407 | |||
Author |
| ||
rmeneses Member Date registered: Mar 2007 Location: Redondo Beach California Vehicle(s): 2007 E350 2010 Honda CR-V (I work for Honda R& D) Posts: 22 | Re: PHOTO DIY- SPARK PLUG CHANGE THANK YOU!! I really appreciate these DIY posts! | ||
#68892 - in reply to #54407 | |||
« View previous thread :: View next thread » |
|
|