| FAQ | Member List | Albums | Today's Posts | Search  |
| Welcome Guest. ( logon | register ) | |||||
| ||||||
|
|
| Topic Tools | Message Format |
| Author |
| ||
| syseng New user Date registered: Dec 2013 Location: Vehicle(s): Posts: 2 | W210 E280 fault codes Hi all !st post on the forum and a new owner of a w210 E280i know nothing abt this car previous car was a Mg Zs V6 180 My 2001 e280 which is dual fuel is giving constant fault codes, I have been told that the post cats have been removed 02 sensors replaced and plugs changed, the errors that show up are below I cannot detect a misfire when driving ,the car will run very erratic from cold sometime but not all ,if I turn the engine off and wait a few seconds restart the fault clears could this be the Maf or vacuum pipes , I have ruled out water in the fuel as the engine is up to temperature and running on LPG but please correct me if I am wrong cheers paul Current Fault Log ------------------ P0135: O2 Sensor Heater Circuit (Bank 1 Sensor 1) P0141: O2 Sensor Heater Circuit (Bank 1 Sensor 2) P0136: O2 Sensor Circuit Malfunction (Bank 1 Sensor 2) P0304: Cylinder 4 Misfire Detected P0306: Cylinder 6 Misfire Detected P0305: Cylinder 5 Misfire Detected P0300: Random/Multiple Cylinder Misfire Detected Pending Fault Log ------------------ P0130: O2 Sensor Circuit (Bank 1 Sensor 1) Historic Fault Log ------------------ ECU reports no historic faults Other discovered fault codes (possibly pending, current or manufacturer specific) ---------------------------------------------------- ECU reports no other fault codes logged End of report. syseng is offline Reply With Quote | ||
| #218804 |
| ||
| « View previous thread :: View next thread » |
|
|
