infozetar
New user
Date registered: Sep 2013
Location:
Vehicle(s):
Posts: 1
| The Complete Injection Molding Process
The two most popular kinds of IMM are the single-stage and the two-stage; there are also injection moulding units with three or more stages. The single-stage IMM is also known as the reciprocating-screw IMM. The two-stage IMM also has other names, such as the piggyback IMM. It is comparable in some ways to a continuous extruder.
The IMM has three basic components: the injection unit, the mold, and the clamping system. The injection molding unit, also called the plasticator, prepares the proper plastic melt and via the injection unit transfers the melt into the next component that is the mold.
The clamping system closes and opens the mold. |
