Welcome Guest. ( logon | register ) | ||||||
|
|
|
| Topic Tools | Message Format |
Author |
| ||
G-AMG G-Class DIY Host Date registered: May 2006 Location: South Texas Vehicle(s): '04 G55, '80 280GE, '99 S420, '98 E320, 2011 E350 | Photo DIY- Front Brake & Rotor Overhaul Although the Pad thickness, and Rotors were WELL within Specification.... there was still a HORRIBLE Screeching noise with Braking.... Yes, I have Cleaned all of the Sliding Surfaces, Re-Lubed the Pads,... All with NO improvement. This is not the first time I have seen this with Mercedes brakes. Sooooo, the Main purpose of my Repair-Visit to my Mom's was to Deal with the Braking system. As always... you must have the utmost care when working on a Raised vehicle... if you don't know what this means... then you shouldn't be doing this kind of work. Since I was working in "Primative" Conditions (by my Spoiled Princess Standards...) the lighting is poor, and my photos not to my liking, thus.... but you can still get a fair jist of the Procedure. I opted to go with the ATE System of Rotors and Pads. As a Note: I spoke with one of the ATE Technical folks regarding "Break-In" Procedure.... they gave the same Speil as if it were a New Car: "Easy Braking for the first 200 miles"... This is the route I took.... This is contrary to alot of folks out there who still go with the "Bedding-In" Procedure, which is quite the rough work-out for brakes. (1.jpg) (2.jpg) (3.jpg) (4.jpg) (5.jpg) (6.jpg) (7.jpg) (8.jpg) (9.jpg) (10.jpg) (11.jpg) (12.jpg) (13.jpg) (14.JPG) (15.JPG) (16.jpg) Attachments ---------------- 1.jpg (75KB - 28 downloads) 2.jpg (107KB - 29 downloads) 3.jpg (93KB - 19 downloads) 4.jpg (113KB - 30 downloads) 5.jpg (105KB - 21 downloads) 6.jpg (97KB - 25 downloads) 7.jpg (116KB - 26 downloads) 8.jpg (64KB - 30 downloads) 9.jpg (112KB - 33 downloads) 10.jpg (112KB - 29 downloads) 11.jpg (102KB - 26 downloads) 12.jpg (109KB - 22 downloads) 13.jpg (108KB - 19 downloads) 14.JPG (50KB - 28 downloads) 15.JPG (63KB - 21 downloads) 16.jpg (109KB - 29 downloads) | ||
#217675 | |||
« View previous thread :: View next thread » |
|
|