| FAQ | Member List | Albums | Today's Posts | Search  |
| Welcome Guest. ( logon | register ) | |||||
| ||||||
|
| Topic Tools | Message Format |
| ||
| G-AMG G-Class DIY Host Date registered: May 2006 Location: South Texas Vehicle(s): '04 G55, '80 280GE, '99 S420, '98 E320, 2011 E350  | Photo DIY- Supporting Joint R/R After noticing a VERY subtle (albeit noticeable) vibration, which my Buttocks felt like it was coming from the Right Front Wheel region. Upon applying a Lever to the Supporting Joint? There is a a 1 mm "play" in the right joint. Translating such a tiny amount of play into "Vibration at 60 mph" is about what I am feeling. Since the Joints are original, and have 18 years, and 183,000 miles of Rough, Lousy, roads on them?? I felt I would simply change them out. After the Change? The Vibration I was feeling?? GONE!!! I went with Lemforder brand, which seems to be the Go-To Brand for Suspension parts. The Post is merely a Color Photo Regurgitaion of WIS. No cutesie tricks. I'm sure there are lots-o-other-ways of performing the change, without any of the MB specified tools. I am simply going "by-the-book". *IMPORTANT NOTE*!! If you are performing the joint change with the Springs Installed?? The Shock-Absorber *MUST* be Installed. As ALWAYS, work *SAFELY*!! G (1.jpg) (2.jpg) (3.jpg) (4.jpg) (5.jpg) (6.jpg) (7.jpg) (8.jpg) (9.jpg) (10.jpg) (11.jpg) (12.jpg) (13.jpg) (14.jpg) Attachments ----------------  1.jpg (71KB - 22 downloads) 2.jpg (93KB - 25 downloads) 3.jpg (87KB - 16 downloads) 4.jpg (69KB - 25 downloads) 5.jpg (79KB - 21 downloads) 6.jpg (89KB - 23 downloads) 7.jpg (95KB - 22 downloads) 8.jpg (88KB - 21 downloads) 9.jpg (75KB - 19 downloads) 10.jpg (117KB - 16 downloads) 11.jpg (100KB - 23 downloads) 12.jpg (94KB - 21 downloads) 13.jpg (83KB - 25 downloads) 14.jpg (84KB - 23 downloads) | |
| ||
|
