Welcome Guest. ( logon | register ) | ||||||
|
|
|
| Topic Tools | Message Format |
Author |
| ||
G-AMG G-Class DIY Host Date registered: May 2006 Location: South Texas Vehicle(s): '04 G55, '80 280GE, '99 S420, '98 E320, 2011 E350 | Photo DIY- Flex Discs and Center Support Bearing R & R Well, it was a "Trifecta" of Slightly 'Firmer' shifts, Some Marginal Cracks in the Discs after 19 Years & 186,000 Miles, and the Nail in the Coffin? I found the Torn Sliding Spline Section Boot sitting on my Garage floor. Soo? Time to get to it! THEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE Most Important thing to remember is MARKING THE ENTIRE SHAFT/DISC/FLANGE(Front & Rear)/DIFFERTENTIAL-TRANSMISSION-BODIES Orientation!! These Shafts are Balanced as a Whole, it is it 100% Imperative the ENTIRE Complex gets put back together AS IT DID IN THE FACTORY. I must say, After the repair? The car shifts better, and is much Smoother at highway speeds. I guess the Rubber gets hard after soooo many years! G (1.jpg) (2.jpg) (3.jpg) (4.jpg) (5.jpg) (6.jpg) (7.jpg) (8.jpg) (9.jpg) (10.jpg) (11.jpg) (12.jpg) (13.jpg) (14.jpg) (15.jpg) (16.jpg) (17.jpg) (18.jpg) (19.jpg) (20.jpg) (21.jpg) (22.jpg) (23.jpg) (24.jpg) (25.jpg) (26.jpg) (27.jpg) (28.jpg) (29.jpg) (30.jpg) (31.jpg) (32.jpg) (33.jpg) (34.jpg) (35.jpg) (36.jpg) Attachments ---------------- 1.jpg (112KB - 23 downloads) 2.jpg (133KB - 26 downloads) 3.jpg (132KB - 24 downloads) 4.jpg (121KB - 27 downloads) 5.jpg (83KB - 26 downloads) 6.jpg (121KB - 27 downloads) 7.jpg (129KB - 23 downloads) 8.jpg (133KB - 29 downloads) 9.jpg (80KB - 30 downloads) 10.jpg (79KB - 33 downloads) 11.jpg (104KB - 29 downloads) 12.jpg (82KB - 22 downloads) 13.jpg (72KB - 27 downloads) 14.jpg (87KB - 27 downloads) 15.jpg (114KB - 28 downloads) 16.jpg (103KB - 22 downloads) 17.jpg (90KB - 28 downloads) 18.jpg (98KB - 26 downloads) 19.jpg (63KB - 25 downloads) 20.jpg (90KB - 19 downloads) 21.jpg (90KB - 26 downloads) 22.jpg (91KB - 24 downloads) 23.jpg (116KB - 31 downloads) 24.jpg (77KB - 24 downloads) 25.jpg (89KB - 26 downloads) 26.jpg (78KB - 25 downloads) 27.jpg (101KB - 22 downloads) 28.jpg (116KB - 24 downloads) 29.jpg (134KB - 29 downloads) 30.jpg (103KB - 24 downloads) 31.jpg (99KB - 25 downloads) 32.jpg (108KB - 27 downloads) 33.jpg (111KB - 23 downloads) 34.jpg (92KB - 26 downloads) 35.jpg (78KB - 27 downloads) 36.jpg (107KB - 24 downloads) | ||
#232624 | |||
Author |
| ||
jmr89 Date registered: Nov 2012 Location: France Vehicle(s): Class G W463 320Cab V6 >>Ancien 230 GE Cab 1990 | RE: Photo DIY- Flex Discs and Center Support Bearing R & R Great | ||
#232628 - in reply to #232624 | |||
Author |
| ||
Eyes Member Date registered: Nov 2007 Location: California Vehicle(s): 2000 E320 Posts: 8 | Re: Photo DIY- Flex Discs and Center Support Bearing R & R Wow ...... Thanks for sharing ................... | ||
#232641 - in reply to #232624 | |||
Author |
| ||
riaanharman Regular Date registered: Jan 2009 Location: South Africa Vehicle(s): 2012 - G300 Professional / 1984 - 300GD Posts: 79 | Re: Photo DIY- Flex Discs and Center Support Bearing R & R Unreal !! Thanks a mil , always enjoying your technical posts. | ||
#232650 - in reply to #232624 | |||
« View previous thread :: View next thread » |
|
|