|
Bill K
Date registered: Dec 1899
Location:
Vehicle(s):
| Drivers window 2001 clk cab
Hi I have a drivers window going up all the way then returning about 5 cm down to a open position. this is when the door is closed.
If I open the door and close the window it works fine and air thight.
Any ideas where to start. |
|
| |
|
Marsden
Classic MB
Date registered: Apr 2006
Location: Capital City USA
Vehicle(s): Mercedes-Benz
| RE: Drivers window 2001 clk cab
If it were just a couple centimeters, I'd think it was the door-closing clearance feature acting up. As it is, not sure, but the 209 and 211 have an all-up/all-down programming feature which can be reset via the key fob, per your manual.
Sometimes resetting that can cure problems such as you are having.
Just throwing out an idea or two here.. |
|
| |
|
AsianML
Date registered: Dec 1899
Location:
Vehicle(s):
| Re: Drivers window 2001 clk cab
Could also be the pinch protection overreacting. The seals or whatever could be a little "tight" making the system think something is caught between the window and door.
Same thing would happen with the ML a while back. Since then it hasn't happened. |
|
| |
|
Bill K
Date registered: Dec 1899
Location:
Vehicle(s):
| RE: Drivers window 2001 clk cab
Thanks guys, I will look in to the two ideas, and report back the out come .
Thanks agian |
|
| |
|
jtbeche
Date registered: Dec 1899
Location:
Vehicle(s):
| RE: Drivers window 2001 clk cab
I was always under the impression that you just need to reset the windows. In other words, press the button to roll the window down but not using the express function, then once down click all the way on the button and hold down for a few seconds. The do the same up. See if that helps.
|
|
| |
