| FAQ | Member List | Albums | Today's Posts | Search  |
| Welcome Guest. ( logon | register ) | |||||
| ||||||
|
| Topic Tools | Message Format |
| ||
| G-AMG G-Class DIY Host Date registered: May 2006 Location: South Texas Vehicle(s): '04 G55, '80 280GE, '99 S420, '98 E320, 2011 E350  | Photo DIY- O2 Sensor Change Greets. After having an intermittently failing Bank 2 Sensor 2 Heater for the last few months, the Sensor itself died the other day. Along with it was a bit of drop in mileage, and a slight roughness to the idle. So, I ordered a new sensor from AutohausAZ. Well, the one they sell is TOO SHORT for Bank2 Sensor2. Sooo, ended up at the Stealership. Please note, this is for the '99 S420. Your numbers may vary. Of course, always use safe and accepted lifting procedures. Just for Reference, BANK 2 is DRIVER'S Side (Left Hand Drive Car), SENSOR 2 is AFT of the Catalytic Converter (1.JPG) (2.JPG) (3.JPG) (4.JPG) (5.JPG) (6.JPG) (7.JPG) Attachments ----------------  1.JPG (66KB - 6 downloads) 2.JPG (55KB - 5 downloads) 3.JPG (63KB - 4 downloads) 4.JPG (51KB - 4 downloads) 5.JPG (75KB - 3 downloads) 6.JPG (81KB - 3 downloads) 7.JPG (73KB - 4 downloads) | |
| ||
| ||
| ||
|
