|Welcome Guest. ( logon | register )|
|Topic Tools||Message Format|
Date registered: Sep 2015
Location: Atlanta/Canton, GA
Vehicle(s): 1980 230g
|Need plug pin out for Throttle body / MAF|
Long time lurker, first time posting. I have spent the last three years squeezing a M119 (from a 92 SL500 w/ 32k miles) into a short wheel base 1980 W460 G wagon. I spend most of my time on ClubGWagon.com but most of the members are diesel and have very little knowledge on this motor.
I am trying to keep everything as clean as possible with my resto mod so am trying to keep original plugs etc. The cable is round with 14 small numbered pins around the perimeter and two pins in the center that comes off of the throttle body/MAF. I need a part number for where this cable plugs into and would really appreciate if someone could give me the pin out diagram on it as well in case I need to just wire it directly into my ecu harness. I would attach photo but can't figure out how yet.
Thank you in advance for your help and insight.
|« View previous thread :: View next thread »|