Welcome Guest. ( logon | register )   
FAQ Member List Albums Today's Posts Search

PointedThree :  Vans, Trucks, SUVs and Other Forums : W164 & W166 M-Class : 166 ML250CDI Buetec

Page 1 of 1 1
166 ML250CDI Buetec
Topic Tools Message Format
Author
Posted 8/20/2012 8:50 AM
darcyocker
Veteran




Date registered: Mar 2008
Location: Cape Town South Africa
Vehicle(s): 1994 W463 G300 Diesel; 1981 W123 300D
Posts: 138
100
166 ML250CDI Buetec

I was wondering if the US have been offered the baby (for SA) entry level ML250CDI BT? It is a 2.1l 4 pot turbo diesel that makes 150kW and 500Nm and uses between 6-6.5l/100km. The prices are quite attractive compared to the larger cc and higher spec models on offer. Went and had a look at them as they have only been recently launched here. Quality seems to be way up on the 163 that I used to have.
#206557
Top of the page Bottom of the page
Author
Posted 8/20/2012 6:49 PM
AlanMcR
Expert




Date registered: Apr 2006
Location: US, CA, Los Altos
Vehicle(s): G300DT E300DT 230SL
Posts: 3500
2000
RE: 166 ML250CDI Buetec

darcyocker - 8/20/2012 5:50 AM I was wondering if the US have been offered the baby (for SA) entry level ML250CDI BT? It is a 2.1l 4 pot turbo diesel that makes 150kW and 500Nm and uses between 6-6.5l/100km. The prices are quite attractive compared to the larger cc and higher spec models on offer. Went and had a look at them as they have only been recently launched here. Quality seems to be way up on the 163 that I used to have.

MBUSA would rather die then offer a fuel efficient MB in the USA.  They seem to have some sort of blind spot to the idea that one can have a well made vehicle that is also economical to operate.  Shame on them.

#206573 - in reply to #206557
Top of the page Bottom of the page
Author
Posted 8/21/2012 7:39 PM
DUTCH
Administrator Doppelgänger




Date registered: Apr 2006
Location: US, GA, Atlanta
Vehicle(s): 2015 Audi Q7 3.0 TDI,2018 Sprinter
Posts: 9963
5000
RE: 166 ML250CDI Buetec

AlanMcR - 8/20/2012 6:49 PM

darcyocker - 8/20/2012 5:50 AM I was wondering if the US have been offered the baby (for SA) entry level ML250CDI BT? It is a 2.1l 4 pot turbo diesel that makes 150kW and 500Nm and uses between 6-6.5l/100km. The prices are quite attractive compared to the larger cc and higher spec models on offer. Went and had a look at them as they have only been recently launched here. Quality seems to be way up on the 163 that I used to have.

MBUSA would rather die then offer a fuel efficient MB in the USA.  They seem to have some sort of blind spot to the idea that one can have a well made vehicle that is also economical to operate.  Shame on them.



Ain't it the sad truth!
#206616 - in reply to #206573
Top of the page Bottom of the page
Author
Posted 8/22/2012 7:56 PM
AlanMcR
Expert




Date registered: Apr 2006
Location: US, CA, Los Altos
Vehicle(s): G300DT E300DT 230SL
Posts: 3500
2000
RE: 166 ML250CDI Buetec

Not bringing in the small BlueEfficiency engines is just sad.

By my calculations, if I were to swap out the OM606 for the 250 BlueEfficiency, I'd have a 30MPG W463.  Even better with some axle changes.  The new motor would have between 36% and 50% more torque where it mattered and it would weigh much less.

If I manage to blow up the OM606, I'll be seriously tempted to try the swap.

 



Edited by AlanMcR 8/22/2012 7:58 PM




(OM606-vs-OM651.jpg)



Attachments
----------------
Attachments OM606-vs-OM651.jpg (169KB - 23 downloads)
#206637 - in reply to #206616
Top of the page Bottom of the page
Author
Posted 8/31/2012 9:20 PM
DUTCH
Administrator Doppelgänger




Date registered: Apr 2006
Location: US, GA, Atlanta
Vehicle(s): 2015 Audi Q7 3.0 TDI,2018 Sprinter
Posts: 9963
5000
RE: 166 ML250CDI Buetec

AlanMcR - 8/22/2012 7:56 PM

Not bringing in the small BlueEfficiency engines is just sad.



In actuality, in the ML, they are already here in the USA. The Vance, AL plant makes them, but they are all exported. It's a Free Trade Zone; so while they are physically on US soil, they are technically not in the US.

This is similar to the off-road package in the ML and GL. When we toured the plant a few years ago, they took us on the off-road test track. All of the vehicles were R-O-W ML's & GL's with the off-road package - not available for sale in the US.

MBUSA Marketing really has their heads firmly planted where the sun never shines. But of course, if the VP for Marketing cannot even spell Gwagen, what is to otherwise be expected.
#206906 - in reply to #206637
Top of the page Bottom of the page
Author
Posted 8/15/2014 12:26 AM
robwill54
Veteran


Date registered: Aug 2007
Location: South of Houston on the Gulf
Vehicle(s): '12 G550,F350 Superduty, E250
Posts: 140
100
RE: 166 ML250CDI Buetec

Well, I just took delivery of this sweet little mill in a E250; not quite an ML but good for 40.2 mpg on a road trip at 70-80 mph. New car with 500 miles when we left; I'm tickled!

Bob
#223447 - in reply to #206557
Top of the page Bottom of the page
« View previous thread :: View next thread »
Page 1 of 1 1
Forum Jump :
All times are EST.  The time is now 2:48:15 PM.

Execution: 0.234 seconds, 96 cached, 17 executed.