|
namsag
Member
Date registered: Nov 2014
Location: north Mississippi
Vehicle(s): '11 G-550, '90 Grand Wagoneer, '09 F-250, '97 LC
Posts: 44
| Part location help- Threaded taillight pan grommets
I have been looking around all evening and would really appreciate a hand. 2011 G - the taillight pan screws go into grommets with threaded metal inserts that pop into the body sheet metal. Mine are bad and need replaced. I found something that looks similar at 4 x 4 Club "Mercedes G-Class Tail Lights Hardware Kit" but not the same - mine have a groove that pops into the sheet metal like most grommets do. Where in the world am I gonna find these. Any help/advice appreciated! Thanks, namsag. |
|
| |
|
DUTCH
Administrator Doppelgänger
Date registered: Apr 2006
Location: US, GA, Atlanta
Vehicle(s): 2015 Audi Q7 3.0 TDI,2018 Sprinter
Posts: 9963
| RE: Part location help- Threaded taillight pan grommets
Your MBUSA Dealer's Parts Counter? |
|
| |
|
namsag
Member
Date registered: Nov 2014
Location: north Mississippi
Vehicle(s): '11 G-550, '90 Grand Wagoneer, '09 F-250, '97 LC
Posts: 44
| Re: Part location help- Threaded taillight pan grommets
Thanks. Unfortunately, they're an hour and a half away, and they have not been that helpful in the past.
I tried to get a media interface cable from them, the guy says "I think that may be the one." He could not show me a picture of it, and would not order it to try without my paying in advance, in full, non-refundable.
I hate to think what would happen with these grommets. |
|
| |
|
ychung
Veteran
Date registered: Aug 2015
Location: SO CAL
Vehicle(s): 2004 G500, 2014 ML350, 2008 S550
Posts: 196
| RE: Part location help- Threaded taillight pan grommets
I am not 100% positive, but try to google A0009880625 or 0009880625, that may be the what you're looking for |
|
| |
|
namsag
Member
Date registered: Nov 2014
Location: north Mississippi
Vehicle(s): '11 G-550, '90 Grand Wagoneer, '09 F-250, '97 LC
Posts: 44
| Re: Part location help- Threaded taillight pan grommets
Ahhh close, but not quite it. Thanks very much though. |
|
| |
|
G4me
Veteran
Date registered: Jan 2012
Location: Honolulu, HI
Vehicle(s): 2002 G500, FJZ80 LandCruiser
Posts: 114
| RE: Part location help- Threaded taillight pan grommets
Similar problem with my local MB dealer. Numerous times I have gone in looking for a replacement part and have them tell me that part is only in European market.
I have had good luck taking a picture of the piece I need that I do not know the technical name for and emailing to vendor like 4x4parts and asking for price and availability. You would be surprised what the vendors know and are able to get ahold of. Try it.
G4me |
|
| |
|
DUTCH
Administrator Doppelgänger
Date registered: Apr 2006
Location: US, GA, Atlanta
Vehicle(s): 2015 Audi Q7 3.0 TDI,2018 Sprinter
Posts: 9963
| Is This It?
https://www.oediscountparts.com/parts/index.cfm?searchText=000988062...
See the included parts diagram. |
|
| |
|
namsag
Member
Date registered: Nov 2014
Location: north Mississippi
Vehicle(s): '11 G-550, '90 Grand Wagoneer, '09 F-250, '97 LC
Posts: 44
| Re: Part location help- Threaded taillight pan grommets
Dutch, that's the idea, as was ychung's post, but it doesn't look exactly like that. I have been in contact with Tracy at that site and sent pics on Fri afternoon, guess I will hear back something on Monday. Thanks, namsag. |
|
| |
|
DUTCH
Administrator Doppelgänger
Date registered: Apr 2006
Location: US, GA, Atlanta
Vehicle(s): 2015 Audi Q7 3.0 TDI,2018 Sprinter
Posts: 9963
| Re: Part location help- Threaded taillight pan grommets
namsag - 7/21/2018 2:47 PM
Dutch, that's the idea, as was ychung's post, but it doesn't look exactly like that.
My experience is that frequently parts do not look exactly as they are shown on the EPC or dealer parts diagrams. At the price of those inserts, they're probably worth a try. I would. |
|
| |
|
namsag
Member
Date registered: Nov 2014
Location: north Mississippi
Vehicle(s): '11 G-550, '90 Grand Wagoneer, '09 F-250, '97 LC
Posts: 44
| Re: Part location help- Threaded taillight pan grommets
Thanks Dutch, I think I will try that. |
|
| |
