|
G350DT
Date registered: Dec 1899
Location:
Vehicle(s):
| Door Latch Question
My drivers side button to open the door needs to be pushed in more and more as the weeks go by. It is getting close to not working at all.
Anyone know if this is something that can be adjusted or do I need a new latch or does anyone know what part I would need.
Thanks |
|
| |
|
fourbyfourclub
Extreme Veteran
Date registered: Apr 2006
Location: New Jersey, USA
Vehicle(s): 300G
Posts: 302
| RE: Door Latch Question
G350DT - 7/19/2007 9:48 AM
My drivers side button to open the door needs to be pushed in more and more as the weeks go by. It is getting close to not working at all.
Anyone know if this is something that can be adjusted or do I need a new latch or does anyone know what part I would need.
Thanks
Richard,
It is adjustable screw on a back of your door handle push button
Regards,
Vlad
fourbyfourclub
|
|
| |
|
G350DT
Date registered: Dec 1899
Location:
Vehicle(s):
| Re: Door Latch Question
Thanks,
I will go take a lookie.
Any clue on how to best access it |
|
| |
|
bwillie
Date registered: Dec 1899
Location:
Vehicle(s):
| RE: Door Latch Question
You will have to pull the inside panel to gain access. If I remember correctly there is a hole in the door to gain access to the adjustment screw. If not, the handles are easily removed by removing the two large screws in the door jam, then loosen the two inside the door that go into the handle. The handle then can be slid towards the back of the truck then pulled off. |
|
| |
|
G350DT
Date registered: Dec 1899
Location:
Vehicle(s):
| Re: Door Latch Question
Tanks |
|
| |
