Welcome Guest. ( logon | register )   
FAQ Member List Albums Today's Posts Search

PointedThree :  Roadster Forums : R171 SLK Class : Rear bumper bits

Page 1 of 1 1
Rear bumper bits
Topic Tools Message Format
Author
Posted 4/26/2006 5:38 AM
da_nailgun

Date registered: Dec 1899
Location:
Vehicle(s):
Rear bumper bits

Hey guys and gals.
Was wondering if someone could help me.

I have a SLK 350 with AMG kit.
I want to change my exhausts to double twins (like the amg55)

I have already purchased the back piece (which has the larger holes)
But now im after the small sliver part at the bottom.

I think that part may only come with a new rear bumper bar, but maybe it can be bought seperately.
Does anyone know?

Ive asked this question b4 on other forums, but I thought id give it a go here.
Otherwise Ill just cut the edges and plastic weld it to make it neat, then re-paint.




(bits.jpg)



Attachments
----------------
Attachments bits.jpg (41KB - 22 downloads)
#2388
Top of the page Bottom of the page
Author
Posted 4/26/2006 6:52 AM
ianx, manchester

Date registered: Dec 1899
Location:
Vehicle(s):
RE: Rear bumper bits

parts guru is consulting the scrolls for you.
he says give him a while to meditate on it!
#2398 - in reply to #2388
Top of the page Bottom of the page
Author
Posted 4/26/2006 9:25 AM
da_nailgun

Date registered: Dec 1899
Location:
Vehicle(s):
RE: Rear bumper bits

lets see what he comes up with

ianx, manchester - 4/26/2006 8:52 AM
parts guru is consulting the scrolls for you.
he says give him a while to meditate on it!
#2472 - in reply to #2398
Top of the page Bottom of the page
Author
Posted 4/27/2006 4:49 AM
da_nailgun

Date registered: Dec 1899
Location:
Vehicle(s):
RE: Rear bumper bits

has the guru come up with anything as yet?

*fingers crossed*
#3460 - in reply to #2472
Top of the page Bottom of the page
Author
Posted 4/27/2006 10:42 AM
Ynot

Date registered: Dec 1899
Location:
Vehicle(s):
Re: Rear bumper bits

da_nailgun, you might have to cut it, I'm thinking about getting the AMG quad exhaust too from Zaint10 but I'm afraid it might not fit. What do you think? And I'm also afraid that smoke will blow out from one side and not the other making it look fake.
#3586 - in reply to #2388
Top of the page Bottom of the page
Author
Posted 4/27/2006 11:56 AM
da_nailgun

Date registered: Dec 1899
Location:
Vehicle(s):
Re: Rear bumper bits

Zaint10?
#3612 - in reply to #3586
Top of the page Bottom of the page
Author
Posted 4/27/2006 12:19 PM
Ynot

Date registered: Dec 1899
Location:
Vehicle(s):
Re: Rear bumper bits

da_nailgun - 4/27/2006 9:56 AM

Zaint10?


A member from benzworld and mbworld whose selling his b/c he got the Kleemann exhaust.
#3623 - in reply to #3612
Top of the page Bottom of the page
Author
Posted 4/27/2006 12:21 PM
da_nailgun

Date registered: Dec 1899
Location:
Vehicle(s):
Re: Rear bumper bits

oh yea.. now i remember
#3625 - in reply to #3612
Top of the page Bottom of the page
Author
Posted 4/29/2006 12:50 PM
ianx, manchester

Date registered: Dec 1899
Location:
Vehicle(s):
RE: Rear bumper bits

Looks like you've gotten parts guru beaten ;-)

he says a part number must exist as this piece of panelling is quite separate from the other bits, but its not shown on any schematic! he will delve further when he has time!

incidentally a template cutout for AMG exhausts is available via torstens forums.
#5482 - in reply to #2388
Top of the page Bottom of the page
Author
Posted 5/1/2006 8:21 PM
da_nailgun

Date registered: Dec 1899
Location:
Vehicle(s):
RE: Rear bumper bits

Yea.
I think that part may ONLY come if you order the entire rear bar
#6754 - in reply to #5482
Top of the page Bottom of the page
« View previous thread :: View next thread »
Page 1 of 1 1
Forum Jump :
All times are EST.  The time is now 1:05:35 AM.

Execution: 0.187 seconds, 91 cached, 9 executed.