Welcome Guest. ( logon | register ) | ||||||
|
|
|
| Topic Tools | Message Format |
Author |
| ||
dentosan New user Date registered: Feb 2014 Location: Cirencester, England Vehicle(s): ML270 Posts: 2 | ML270 Ashtray Illumination Bulb. Good evening to all, 2003 ML270 (W163), the bulb has blown on the ashtray illumination. Have scoured various forums on this, but cannot find a definite answer on how to replace the bulb. There are several horror stories on removing the entire centre console in order to remove the complete ashtray, but surely even Mercedes would not make you do this just to replace a bulb? I can remove the ashtray insert easy enough by using the slider switch, but then cannot see how to remove the cigarette lighter part in order to get to the connector behind which holds the bulb. As always with interior trim, not keen to put too much rice on anything without knowing how the clips are located to avoid that dreaded plastic snapping sound. Can anyone help please? Many thanks. | ||
#220930 | |||
Author |
| ||
Fenalaar Elite Veteran Date registered: May 2006 Location: Narvik, Norway Vehicle(s): 2001 ML270CDI, Polaris 400L Big Boss Posts: 826 | RE: ML270 Ashtray Illumination Bulb. Remove the inner "bucket" from the center console compartment, by removing the 4 screws in the bottom. When you have removed that, you can get to the clips holding everyting together. Johan-Kr Edited by Fenalaar 4/7/2014 5:31 PM | ||
#221195 - in reply to #220930 | |||
« View previous thread :: View next thread » |
|
|