Welcome Guest. ( logon | register ) | ||||||
|
|
|
| Topic Tools | Message Format |
Author |
| ||
scohyj Date registered: Dec 1899 Location: Vehicle(s): | ML500 Oil Change I have decided that I will change the oil in this ML500 myself. Unlike the other M-B's on which I have performed a oil change, there is no dipstick. I vacuum the oil. Is that red plug removable and replaceable or is a replacement necessary? Thanks | ||
#144006 | |||
Author |
| ||
DUTCH Administrator Doppelgänger Date registered: Apr 2006 Location: US, GA, Atlanta Vehicle(s): 2015 Audi Q7 3.0 TDI,2018 Sprinter Posts: 9963 | RE: ML500 Oil Change scohyj - 2/16/2009 6:09 PM I have decided that I will change the oil in this ML500 myself. Unlike the other M-B's on which I have performed a oil change, there is no dipstick. I vacuum the oil. Is that red plug removable and replaceable or is a replacement necessary? Thanks I'm not sure what the engine without a dipstick has to cover the dipstick tube. If it's like the ATF tube, there should be a way to remove it. Does your owner's manual give you any assistance? A picture would be worth a thousand words of description. | ||
#144013 - in reply to #144006 | |||
Author |
| ||
scohyj Date registered: Dec 1899 Location: Vehicle(s): | Re: ML500 Oil Change I'll get apicture to you in the next couple of days. After some thought, I came to the conclusion that the cap was not the same as the locking/replaceable cap used on the transmission dipstick tube. I was able to grab this with one hand today and pull it out of the dipstick tube. The reason it had been so tight is the o-ring used to seal the dipstick tube forms a terrific seal. This is a red cap versus a yellow cap that was used for the tranny if I remember correctly. Picture to follow. | ||
#144131 - in reply to #144013 | |||
Author |
| ||
DUTCH Administrator Doppelgänger Date registered: Apr 2006 Location: US, GA, Atlanta Vehicle(s): 2015 Audi Q7 3.0 TDI,2018 Sprinter Posts: 9963 | Re: ML500 Oil Change scohyj - 2/17/2009 7:10 PM I'll get apicture to you in the next couple of days. After some thought, I came to the conclusion that the cap was not the same as the locking/replaceable cap used on the transmission dipstick tube. I was able to grab this with one hand today and pull it out of the dipstick tube. The reason it had been so tight is the o-ring used to seal the dipstick tube forms a terrific seal. This is a red cap versus a yellow cap that was used for the tranny if I remember correctly. Picture to follow. If you have a dipstick tube with a removable cap, that is almost certainly the place to MityVac out the engine oil. | ||
#144309 - in reply to #144131 | |||
Author |
| ||
scohyj Date registered: Dec 1899 Location: Vehicle(s): | RE: ML500 Oil Change Hopefully I can attach a photo showing th cap. | ||
#145069 - in reply to #144006 | |||
Author |
| ||
scohyj Date registered: Dec 1899 Location: Vehicle(s): | RE: ML500 Oil Change Try again! (IMG_0605.JPG) Attachments ---------------- IMG_0605.JPG (444KB - 9 downloads) | ||
#145071 - in reply to #144006 | |||
Author |
| ||
DUTCH Administrator Doppelgänger Date registered: Apr 2006 Location: US, GA, Atlanta Vehicle(s): 2015 Audi Q7 3.0 TDI,2018 Sprinter Posts: 9963 | RE: ML500 Oil Change Interesting. Looks like they saved a dime by not having the measuring cable attached to the cap. If you can get the MityVac tube down that pipe and suck oil, you've get the right place. Please limit the size of any future posted pictures to a maximum of 800 pixels on the long side. Thanks. | ||
#145116 - in reply to #145071 | |||
Author |
| ||
FredyG Regular Date registered: Oct 2007 Location: Venezuela Vehicle(s): 1993 Defender, 96 Camel Trophy, 2000 G500 Cabrio Posts: 79 | Re: ML500 Oil Change Dutch, do you know where can I get the "MERCEDES BENZ" LOGO (STICKER) that goes on top of the 500 engine air filter (113) like the one you can see in the upper photo? | ||
#145333 - in reply to #144013 | |||
Author |
| ||
DUTCH Administrator Doppelgänger Date registered: Apr 2006 Location: US, GA, Atlanta Vehicle(s): 2015 Audi Q7 3.0 TDI,2018 Sprinter Posts: 9963 | Re: ML500 Oil Change FredyG - 3/1/2009 8:58 PM Dutch, do you know where can I get the "MERCEDES BENZ" LOGO (STICKER) that goes on top of the 500 engine air filter (113) like the one you can see in the upper photo? Not sure what "upper photo" you mean. If you mean the only photo posted in this thread, that's a moulded plastic piece that is part of the air filter housing. I doubt if it would be available as a separate piece, except possibly from a wrecking yard. | ||
#145437 - in reply to #145333 | |||
« View previous thread :: View next thread » |
|
|