Welcome Guest. ( logon | register ) | ||||||
|
|
|
| Topic Tools | Message Format |
Author |
| ||
C-Rod Veteran Date registered: Apr 2006 Location: Guelph, Ontario. Vehicle(s): 2006 ML 350 Posts: 158 | l've never seen this one before......... l didn't think it was possible under the hood..... http://cgi.ebay.com/ebaymotors/Mercedes-M-Class-Netami-Strut-Bar_W0... | ||
#15127 | |||
Author |
| ||
questwest Date registered: Dec 1899 Location: Vehicle(s): | RE: l've never seen this one before......... it is immposible | ||
#15153 - in reply to #15127 | |||
Author |
| ||
JimB Date registered: Dec 1899 Location: Vehicle(s): | RE: l've never seen this one before......... I have it on my Civic, and it works, I'm not sure on ML if it will fit. Probabaly? | ||
#15345 - in reply to #15127 | |||
Author |
| ||
phoenix44 Date registered: Dec 1899 Location: Vehicle(s): | RE: l've never seen this one before......... Would there be much of a diiference between the ML's truck frame, and the others which are all unibody construction? I know that the ML's fram does not flex much, if at all. | ||
#15374 - in reply to #15345 | |||
Author |
| ||
questwest Date registered: Dec 1899 Location: Vehicle(s): | RE: l've never seen this one before......... in order to fit strut tower bar on ML someone will have to either drill a hole in the engine block large enough for the bar to go through or raise mounting points so it can go over the engine which in both cases seriously jepordises chances of the truck to run properly | ||
#15392 - in reply to #15345 | |||
« View previous thread :: View next thread » |
|
|