Welcome Guest. ( logon | register ) | ||||||
|
|
|
| Topic Tools | Message Format |
Author |
| ||
MLOffRoad Date registered: Dec 1899 Location: Vehicle(s): | Re: Whats up guys??? Thanks again Peter... I sure hope I dont run into many problems. This is going to be quite interesting to tackle. If I run into any problems Ill post them up in another thread. I pick up the used tranny on Tuesday so I dont expect to start till that evening. I have such limited time so It will probably take me a few days to get it all done. | ||
#17061 - in reply to #16699 | |||
Author |
| ||
pleubner Date registered: Apr 2006 Location: Basel, Switzerland Vehicle(s): ML270CDI Brabus-W163,SL55 AMG-R230,ML320 CDI-W164 | Re: Whats up guys??? No big deal .... essentially you are removing a middle piece .... the engine is at one end, and the transfer case at the other .....
Initially you start with removing the noise encapsulation covers, then remove the cross bar, exhaust bracket. Then let out the fluid. Next the filler pipe, oil cooler lines, electrical connectors ..... and now your ready to remove the damm thing! First remove the propeller shafts, then transfer case (supporting the transmission), and last of all the engine side (first the torque converter to gear ring, then the transmission housing)
... Hows that for a super quick summary?.... For details my DIY pics! | ||
#17067 - in reply to #17061 | |||
Author |
| ||
MLOffRoad Date registered: Dec 1899 Location: Vehicle(s): | Re: Whats up guys??? pleubner - 5/28/2006 12:36 PM No big deal .... essentially you are removing a middle piece .... the engine is at one end, and the transfer case at the other .....
Initially you start with removing the covers, then remove the cross bar, exhaust bracket. Then let out the fluid. Next the filler pipe, oil cooler lines, electrical connectors ..... and now your ready to remove the damm thing! First remove the propeller shafts, then transfer case (supporting the transmission), and last of all the engine side (first the torque converter to gear ring, then the transmission housing)
... Hows that for a super quick summary?.... For details my DIY pics! Now that is the best DIY I have ever seen... LOL | ||
#17080 - in reply to #17067 | |||
Author |
| ||
pleubner Date registered: Apr 2006 Location: Basel, Switzerland Vehicle(s): ML270CDI Brabus-W163,SL55 AMG-R230,ML320 CDI-W164 | Re: Whats up guys??? heh,heh .... If you had a chance to look at the WIS instructions you'll find my summary pretty detailed compared!
I have a little update on the parts list for you. Parts List: Oil Filler pipe Seal, A 022 997 22 48 Magnet, A 169 371 00 03 Filter, A 140 277 00 95 3 plastic covers : 2x under the transmission where the converter is located Diagram No. 50 (gasket converter housing), A 163 271 00 80 1x for the view port where the converter gets bolted on to the engine (Gear ring), A 102 014 00 33 (not sure if there is a "A" in front) 21x noise encapsulation plastic rivets (the clips/screws that hold the noise encapsulation covers on), A 163 990 02 92
| ||
#17285 - in reply to #17080 | |||
Author |
| ||
MLOffRoad Date registered: Dec 1899 Location: Vehicle(s): | Re: Whats up guys??? Thanks again Peter! I really appreciate all the help... I pick up the tranny tommorow and I should begin diss-assembling the truck tommorow evening or wed sometime. I probably wont be done till sometime during the weekend since I have so many other things going on at the same time. Ill keep you guys posted and Ill take many many pictures and post them in a new thread that I will open tommorow. I hope everything goes smoothly. Wish me luck!! | ||
#17382 - in reply to #16699 | |||
Author |
| ||
pleubner Date registered: Apr 2006 Location: Basel, Switzerland Vehicle(s): ML270CDI Brabus-W163,SL55 AMG-R230,ML320 CDI-W164 | Re: Whats up guys??? I take the tranny then it fits your 320 ? ...... 722.662 GOOD LUCK MAN ! PS: Maybe short videos of each step would be better (MP4 format)
Make sure you take pics of that ramp, and you on your back underneath it!!!!! | ||
#17475 - in reply to #17382 | |||
Author |
| ||
pleubner Date registered: Apr 2006 Location: Basel, Switzerland Vehicle(s): ML270CDI Brabus-W163,SL55 AMG-R230,ML320 CDI-W164 | Notice the comment about the judder in 99 Models
| ||
#17591 - in reply to #16699 | |||
Author |
| ||
Wolfgang Date registered: Dec 1899 Location: Vehicle(s): | RE: Notice the comment about the judder in 99 Models Only early 99s up to October 19, 1998 production date. http://www.whnet.com/4x4/transfercase.html MB exchanged mine under waranty - and without arm twisting. Edited by Wolfgang 5/30/2006 2:41 PM | ||
#17612 - in reply to #17591 | |||
Author |
| ||
MLOffRoad Date registered: Dec 1899 Location: Vehicle(s): | Re: Whats up guys??? pleubner - 5/30/2006 1:47 AM I take the tranny then it fits your 320 ? ...... 722.662 GOOD LUCK MAN ! PS: Maybe short videos of each step would be better (MP4 format)
Make sure you take pics of that ramp, and you on your back underneath it!!!!! Yup... I picked up the tranny a few hours ago. Check out the new thread I opened. I posted pics of the tranny and part number etc. | ||
#17762 - in reply to #17475 | |||
« View previous thread :: View next thread » |
|
|