|
DUTCH
Administrator Doppelgänger
Date registered: Apr 2006
Location: US, GA, Atlanta
Vehicle(s): 2015 Audi Q7 3.0 TDI,2018 Sprinter
Posts: 9963
| Brake Bleeding Pressure
There was a recent thread either here or on the old forum about how much pressure to use with a Pressure Bleeder in order to bleed the brakes - especially on vehicles with ABS.
Answer: 2 Bar = 29 PSI
This from the MB workshop manual for the G. (I have so darned many books and papers that sometimes it's hard to put my fingers on something right away.) |
|
| |
|
dai
Expert
Date registered: Apr 2006
Location: Oregon USA
Vehicle(s): 300GD 300TD BMW R100RS Landini 80F
Posts: 2110
| Re: Brake Bleeding Pressure
Thanks Dutch, in the non ABS trucks I usually can do a good job at 15 psi or so.
-Dai |
|
| |
|
T.Schuhe
Elite Veteran
Date registered: Apr 2006
Location: Olympia, Washington State, USA
Vehicle(s): 460 1985 LWB 300GD five speed
Posts: 711
| Re: Brake Bleeding Pressure
Yes, On my G I get by with about 15 psi. Thanks for your note Dai.
ts |
|
| |
