Welcome Guest. ( logon | register ) | ||||||
|
|
|
| Topic Tools | Message Format |
Author |
| ||
DUTCH Administrator Doppelgänger Date registered: Apr 2006 Location: US, GA, Atlanta Vehicle(s): 2015 Audi Q7 3.0 TDI,2018 Sprinter Posts: 9963 | Brake Bleeding Pressure There was a recent thread either here or on the old forum about how much pressure to use with a Pressure Bleeder in order to bleed the brakes - especially on vehicles with ABS. Answer: 2 Bar = 29 PSI This from the MB workshop manual for the G. (I have so darned many books and papers that sometimes it's hard to put my fingers on something right away.) | ||
#19108 | |||
Author |
| ||
dai Expert Date registered: Apr 2006 Location: Oregon USA Vehicle(s): 300GD 300TD BMW R100RS Landini 80F Posts: 2110 | Re: Brake Bleeding Pressure Thanks Dutch, in the non ABS trucks I usually can do a good job at 15 psi or so. -Dai | ||
#19157 - in reply to #19108 | |||
Author |
| ||
T.Schuhe Elite Veteran Date registered: Apr 2006 Location: Olympia, Washington State, USA Vehicle(s): 460 1985 LWB 300GD five speed Posts: 711 | Re: Brake Bleeding Pressure Yes, On my G I get by with about 15 psi. Thanks for your note Dai. ts | ||
#19453 - in reply to #19157 | |||
« View previous thread :: View next thread » |
|
|