| FAQ | Member List | Albums | Today's Posts | Search  |
| Welcome Guest. ( logon | register ) | |||||
| ||||||
|
| Topic Tools | Message Format |
| ||
| gbenzer Extreme Veteran Date registered: Dec 2006 Location: Georgia Vehicle(s): 2007 G-500, 2017 Audi Q7 Posts: 418  | ABS light Starting an old thread again. I've had intermittent ABS light on for years. Sometimes it would stay on when engine starts and sometimes it would come on after driving for a while. Of course the ABS and cruise control wouldn't work and the engine would go into limp mode when the ABS light is on. I've replace the sensor cables, brake light switch, computer board, alternator and voltage regulator which are the parts associated with the system. Until today I've never been able to define a common way to define what turned the light on except I would notice that it came on in stop and go traffic sometimes. I could never tell what I was doing that made the light come on. Today I was driving in traffic and as I put my foot on the brake I felt a "bump" as I pressed the brake peddle and at the same instant I saw the ABS light come on. Any suggestions as to what part may have caused the "bump" and that would cause the ABS system light to come on?  | |
| ||
| ||
| Aircruiser Extreme Veteran Date registered: Aug 2011 Location: Atlanta GA Vehicle(s): 2000 G500, 1986 300GD, 2017 Porsche Cayenne Hybrid Posts: 364 | ||
| ||
| ||
| AlanMcR Expert Date registered: Apr 2006 Location: US, CA, Los Altos Vehicle(s): G300DT E300DT 230SL Posts: 3500  | ||
| ||
| ||
| gbenzer Extreme Veteran Date registered: Dec 2006 Location: Georgia Vehicle(s): 2007 G-500, 2017 Audi Q7 Posts: 418 | ||
| ||
|
