Welcome Guest. ( logon | register ) | ||||||
|
|
|
| Topic Tools | Message Format |
Author |
| ||
AGuess Elite Veteran Date registered: Apr 2006 Location: Holly Springs NC Vehicle(s): 93 500GE, 93 500GE, 2002 G500 Posts: 717 | Windshield wiper adjustment Hi everyone, I just replaced the motor and all linkage under the dash. Before I put the wiper blades on, I ran the motor and turned off the switch. Then I put the wiper arms on, so they were level at the bottom of the windshield. Now when I turn them on, they travel a about 3/4 of the way up and then travel,down and go below the bottom edge of the windshield. So, I removed them and reinstalled so they sit about 1/4 the way up the glass. Now they wipe the full range of the windshield without hitting the bottom edge, but when I cut them off they are still stopping 1/4 high which blocks vision. So there must be a way to adjust this. Thank you for your help. Alex | ||
#241372 | |||
Author |
| ||
DUTCH Administrator Doppelgänger Date registered: Apr 2006 Location: US, GA, Atlanta Vehicle(s): 2015 Audi Q7 3.0 TDI,2018 Sprinter Posts: 9963 | RE: Windshield wiper adjustment Can you check the WIS in your SD Connect? | ||
#241373 - in reply to #241372 | |||
Author |
| ||
AGuess Elite Veteran Date registered: Apr 2006 Location: Holly Springs NC Vehicle(s): 93 500GE, 93 500GE, 2002 G500 Posts: 717 | Re: Windshield wiper adjustment Hi Dutch, that is a good idea, I’ve only used the SD connect to troubleshoot my 2002 G and 2012 ML350 and reset codes. I did not know it would connect to WIS. I’ll let u know. Thanks AGuess | ||
#241375 - in reply to #241373 | |||
« View previous thread :: View next thread » |
|
|