Welcome Guest. ( logon | register ) | ||||||
|
|
|
| Topic Tools | Message Format |
Author |
| ||
G350DT Date registered: Dec 1899 Location: Vehicle(s): | Cleaned out engine area now runs like poo After the fun in the mud I came home and did the pressure wash thing. I cleaned under the hood and started it up for a few then went to bed. Now the issue, it is not running on the #3 cylinder. I tried: Cleaning the cap and rotor. Cleaning the plug. Different wire Seems nothing helps I do get a minor spark from the #3 wire not much though. Other odd thing is when running it is real rough, when I pull the #3 wire it runs smoother So sounds like a cap to me, any other ideas. Also anyone know a Bosch part # for the rotor and cap for a 110 engine? ? ? Thanks Rick | ||
#28048 | |||
Author |
| ||
Ed Mclass Expert Date registered: Apr 2006 Location: Nashville, Tennessee Vehicle(s): 1958 180a, 2010 GLK, 2000 G 500, 2005 SLK 350 Posts: 1215 | RE: Cleaned out engine area now runs like poo The cap and the rotor are the same as the sedan. Take the rotor and cap to your local parts house and don't tell them it's for a G. They can match it up. Sean at Eurotruck can get you one too I'm sure. www.eurotruck-importers.com. | ||
#28120 - in reply to #28048 | |||
Author |
| ||
G350DT Date registered: Dec 1899 Location: Vehicle(s): | Re: Cleaned out engine area now runs like poo It was the cap. Got 3 sets so I do not get stuck out there without | ||
#28185 - in reply to #28048 | |||
« View previous thread :: View next thread » |
|
|