|
G350DT
Date registered: Dec 1899
Location:
Vehicle(s):
| Cleaned out engine area now runs like poo
After the fun in the mud I came home and did the pressure wash thing.
I cleaned under the hood and started it up for a few then went to bed.
Now the issue, it is not running on the #3 cylinder.
I tried:
Cleaning the cap and rotor.
Cleaning the plug.
Different wire
Seems nothing helps
I do get a minor spark from the #3 wire not much though.
Other odd thing is when running it is real rough, when I pull the #3 wire it runs smoother
So sounds like a cap to me, any other ideas.
Also anyone know a Bosch part # for the rotor and cap for a 110 engine? ? ?
Thanks
Rick |
|
| |
|
Ed Mclass
Expert
Date registered: Apr 2006
Location: Nashville, Tennessee
Vehicle(s): 1958 180a, 2010 GLK, 2000 G 500, 2005 SLK 350
Posts: 1215
| RE: Cleaned out engine area now runs like poo
The cap and the rotor are the same as the sedan. Take the rotor and cap to your local parts house and don't tell them it's for a G. They can match it up. Sean at Eurotruck can get you one too I'm sure. www.eurotruck-importers.com.  |
|
| |
|
G350DT
Date registered: Dec 1899
Location:
Vehicle(s):
| Re: Cleaned out engine area now runs like poo
It was the cap. Got 3 sets so I do not get stuck out there without |
|
| |
