| FAQ | Member List | Albums | Today's Posts | Search  |
| Welcome Guest. ( logon | register ) | |||||
| ||||||
|
| Topic Tools | Message Format |
| ||
| G1979 Veteran Date registered: Apr 2006 Location: Indialantic, Fl Vehicle(s): G500 2005 Posts: 185  | ||
| ||
| ||
| DUTCH Administrator Doppelgänger Date registered: Apr 2006 Location: US, GA, Atlanta Vehicle(s): 2015 Audi Q7 3.0 TDI,2018 Sprinter Posts: 9963  | RE: Flushing brake fluid in ABS vehicle - Procedure Attached G1979 - 7/11/2006 9:08 AM Hey guy I am getting close to do the service on the G, so I'm doing my homework, I was doing some search on brake fluids on the old forum and I read this: "Older vehicles can do with the constant over-pressure system, newer vehicles with ESP, ABS, etc... need an electronic system which pulsates your hydraulics." Those this means that I can not use the the power bleeder that I use in the old G? If not which bleeder are you guys using? thank you JV The power bleeder is fine. It's what is used by the MB dealer shops. WIS says 2 Bar = 29 psi. Attachments ----------------  BrakeBleed.pdf (101KB - 19 downloads) | |
| ||
| ||
| G1979 Veteran Date registered: Apr 2006 Location: Indialantic, Fl Vehicle(s): G500 2005 Posts: 185 | ||
| ||
|
