Welcome Guest. ( logon | register ) | ||||||
|
|
|
| Topic Tools | Message Format |
Author |
| ||
Nutz Expert Date registered: Apr 2006 Location: Vehicle(s): Posts: 2026 | A couple questions . There is an 82 for sale here with no engine and transmission but I have a spare M110 and transmission from a W123 280E. Will it bolt right in? Also,is the wheel bolt pattern the same as all the others, 5 X 112mm ? Thanks | ||
#31115 | |||
Author |
| ||
dai Expert Date registered: Apr 2006 Location: Oregon USA Vehicle(s): 300GD 300TD BMW R100RS Landini 80F Posts: 2110 | RE: A couple questions . It will be close. You will need to change the output flange or make a short driveshaft that has the three point MB automotive/hardie disk on your tranny end to the eight bolt truck flange the G uses on the T-case. I personally would make the shaft so the rubber flex joint will help keep things smooth. This is your opportunity to diesel power it, however. -Dai | ||
#31263 - in reply to #31115 | |||
Author |
| ||
kerry460 Elite Veteran Date registered: Apr 2006 Location: tasmania australia Vehicle(s): 1984 300GD LWB WAGEN Posts: 611 | RE: A couple questions . G,,day , i think stud pattern on all G wheels is 5 x 130.kerry. | ||
#31267 - in reply to #31115 | |||
« View previous thread :: View next thread » |
|
|