Welcome Guest. ( logon | register ) | ||||||
|
|
|
| Topic Tools | Message Format |
Author |
| ||
cmitch Expert Date registered: Apr 2006 Location: Ala-Tenn Vehicle(s): 2002 ML320, 2005 S430 4Matic, 2010 F150 Super Crew Posts: 3412 | Engine nearly stalls, no codes 2002 ML320 67000 miles Nearly every morning, you can start the vehicle, pull out and drive it 3/4 mile down the road. Perfect. You stop at stop sign to clear traffic, press accelerator pedal and it nearly stalls. The wife has been complaining about it but I could never make it do it until this morning. Once it recovers, it drives fine for the rest of the day. I had the codes checked this morning. Nothing registered-system passed. Opinions? Fuel Filter, maybe? Edited by cmitch 7/7/2007 5:36 PM | ||
#81521 | |||
Author |
| ||
azinn Date registered: Dec 1899 Location: Vehicle(s): | RE: Engine nearly stalls, no codes 2002 ML320 67000 miles cmitch - 7/7/2007 5:35 PM Nearly every morning, you can start the vehicle, pull out and drive it 3/4 mile down the road. Perfect. You stop at stop sign to clear traffic, press accelerator pedal and it nearly stalls. The wife has been complaining about it but I could never make it do it until this morning. Once it recovers, it drives fine for the rest of the day. I had the codes checked this morning. Nothing registered-system passed. Opinions? Fuel Filter, maybe? That would be the first thing I would replace. Should have been done at 60,000 or sooner anyway. If that doesn't work, then I would run a bottle of Chevron Techron through the gas tank to clean things out a little. My 2 cents. | ||
#82249 - in reply to #81521 | |||
Author |
| ||
Tarydesign Date registered: Dec 1899 Location: Vehicle(s): | Re: Engine nearly stalls, no codes 2002 ML320 67000 miles I agree, check that filter.. But Beware its quite a job!!! And even a little restriction made a Huge difference on mine!! | ||
#82945 - in reply to #81521 | |||
Author |
| ||
FrankMB Member Date registered: Dec 2006 Location: Vehicle(s): Posts: 30 | RE: Engine nearly stalls, no codes 2002 ML320 67000 miles Might also be a vacuum leak from the airbox to the intake. Had this problem awhile back, one of the clamps was lose and the computer was adapting to compensate. Stalled quite a few times as well. | ||
#82966 - in reply to #81521 | |||
Author |
| ||
lkchris Veteran Date registered: Nov 2006 Location: Albuquerque Vehicle(s): '07 GL320CDI, '06 E320CDI Posts: 144 | RE: Engine nearly stalls, no codes 2002 ML320 67000 miles Filter? What a silly idea! You most likely need a new crankshaft position sensor.
| ||
#82991 - in reply to #81521 | |||
Author |
| ||
MADSLEG Date registered: Dec 1899 Location: Vehicle(s): | Re: Engine nearly stalls, no codes 2002 ML320 67000 miles Fuel filter or/and air filter I had same problem,replaced gas and air filters solved the problem. Good luck )) | ||
#84112 - in reply to #81521 | |||
« View previous thread :: View next thread » |
|
|