|
4x4abc
Date registered: Apr 2006
Location: La Paz, Baja California, Mexico
Vehicle(s): 02 G500
| Re: Crankshaft Position Sensor - removal tool
OK - I replaced the CPS today
generic Bosch part, but no Mercedes part number printed on it
strangely the diameter was slightly larger and the CPS did not want to slide down the hole
measure it, and yes, it is just a few 1,000 thicker
sanded it down a bit and it fits perfectly
time will tell whether my symptoms are gone or not
|
|
| |
|
G-AMG
G-Class DIY Host
Date registered: May 2006
Location: South Texas
Vehicle(s): '04 G55, '80 280GE, '99 S420, '98 E320, 2011 E350
| Re: Crankshaft Position Sensor - removal tool
4x4abc - 2/23/2018 7:56 PM
symptoms fit description of CPS failing
r
Master... I, the lowly Temple-Monkey, hate to disagree with you... But I highly doubt this is a CPS problem..
Every CPS I've had/seen Fail?? It's an All-or-Nothing... THE ENGINE DIES!!! Usually, when the engine is HOT.. You let it cool off?? STARTS UP again.
Do you 'Have Codes' ??
Perhaps a Coil Pack is on its Last legs??? Look for a 300 series Fault code...
"G" |
|
| |
|
4x4abc
Date registered: Apr 2006
Location: La Paz, Baja California, Mexico
Vehicle(s): 02 G500
| Re: Crankshaft Position Sensor - removal tool
Karl is not around and I don't have a code reader
we'll know in a couple of weeks |
|
| |
|
DUTCH
Administrator Doppelgänger
Date registered: Apr 2006
Location: US, GA, Atlanta
Vehicle(s): 2015 Audi Q7 3.0 TDI,2018 Sprinter
Posts: 9964
| Re: Crankshaft Position Sensor - removal tool
G-AMG - 2/25/2018 3:20 PM
Master... I, the lowly Temple-Monkey, hate to disagree with you... But I highly doubt this is a CPS problem..
Every CPS I've had/seen Fail?? It's an All-or-Nothing... THE ENGINE DIES!!! Usually, when the engine is HOT.. You let it cool off?? STARTS UP again.
Agree. Never got a CEL from a defective CPS.
Sounds like what happened with my Throttle Position Sensor, i.e. the drive by wire part. |
|
| |
|
4x4abc
Date registered: Apr 2006
Location: La Paz, Baja California, Mexico
Vehicle(s): 02 G500
| RE: Crankshaft Position Sensor - removal tool
will check TPS next |
|
| |
