Welcome Guest. ( logon | register )   
FAQ Member List Albums Today's Posts Search

PointedThree :  Vans, Trucks, SUVs and Other Forums : G-Class DIY Forum : Photo DIY- V-Belt Changes M110 Engine

Page 1 of 1 1
Photo DIY- V-Belt Changes M110 Engine
Topic Tools Message Format
Author
Posted 9/14/2008 7:43 PM
G-AMG
G-Class DIY Host




Date registered: May 2006
Location: South Texas
Vehicle(s): '04 G55, '80 280GE, '99 S420, '98 E320, 2011 E350
1000
Photo DIY- V-Belt Changes M110 Engine

Greets.

Since IKE was kind enough to "magically" bypass us (my condolences to our Houston Brethren) , I had time this week-end to deal with my old V-Belts, some of which have a bit of a squeal.
I also got my new A/C hoses installed.

I had difficulty finding Conti Belts in the appropriate sizes, so I gave up and bought them from my dealer. I was surprised to see them use US made belts (Gates), and one German brand "Optibelt".

PLEASE NOTE!--- These Belt Sizes are for MY M110 Engine (110 994) with Diavia Aftermarket A/C. Please consult your EPC for your correct part numbers, or BETTER YET, check the belts you PRESENTLY have. My EPC showed a A/C belt 20mm TOO SHORT.

Alternator Belt- 10mm by 960mm

Power Steering- 13mm by 1000mm

A/C- 13mm by 1395mm.

Going from the Owner's Manual, I would have thought this job to be a fairly "No-Brainer". It ended up being a moderate "pain in the butt".

For such a spacious engine bay, I found it surprisingly difficult to access the various bolts. I think I must have gone through a dozen or more combinations
of spanners, sockets (6 and 12 point, U-Joint), ratchet wrenches, etc, in order to free the "frozen" bolts.

Certainly, not what I was expecting for a "field-servicable" vehicle. I would never DREAM of trying this in the Gobi Desert at night, in snow.........

The worst "salt on the wound" was having to do the whole adjustment ordeal AFTER the 15 minute drive. Now, accessing these spaces with HOT ENGINE/Radiator.. was a challenge. PLEASE use long sleeves/gloves when doing the final adjustment.

Anyhooo, it is one of those needed evils to care for our trucks. Per the manual, one needs to Check/Re-Tighten the Belts each 6,000 Miles!!



(1.JPG)



(2.JPG)



(3.JPG)



(4.JPG)



(5.JPG)



(6.JPG)



(7.JPG)



(8.JPG)



(9.JPG)



(10.JPG)



(11.JPG)



(12.JPG)



(13.JPG)



(14.JPG)



(15.JPG)



(16.JPG)



(17.JPG)



(18.JPG)



(19.JPG)



(20.JPG)



(21.JPG)



(22.JPG)



(23.JPG)



(24.JPG)



Attachments
----------------
Attachments 1.JPG (91KB - 14 downloads)
Attachments 2.JPG (96KB - 10 downloads)
Attachments 3.JPG (69KB - 10 downloads)
Attachments 4.JPG (66KB - 10 downloads)
Attachments 5.JPG (86KB - 12 downloads)
Attachments 6.JPG (76KB - 10 downloads)
Attachments 7.JPG (73KB - 9 downloads)
Attachments 8.JPG (86KB - 10 downloads)
Attachments 9.JPG (60KB - 9 downloads)
Attachments 10.JPG (70KB - 9 downloads)
Attachments 11.JPG (73KB - 9 downloads)
Attachments 12.JPG (97KB - 10 downloads)
Attachments 13.JPG (71KB - 10 downloads)
Attachments 14.JPG (104KB - 10 downloads)
Attachments 15.JPG (81KB - 10 downloads)
Attachments 16.JPG (28KB - 10 downloads)
Attachments 17.JPG (71KB - 10 downloads)
Attachments 18.JPG (95KB - 10 downloads)
Attachments 19.JPG (111KB - 9 downloads)
Attachments 20.JPG (79KB - 9 downloads)
Attachments 21.JPG (90KB - 10 downloads)
Attachments 22.JPG (112KB - 10 downloads)
Attachments 23.JPG (103KB - 9 downloads)
Attachments 24.JPG (82KB - 12 downloads)
#131711
Top of the page Bottom of the page
Author
Posted 9/14/2008 9:42 PM
Titus Pullo
Elite Veteran




Date registered: May 2007
Location: Ottawa, ON, Canada
Vehicle(s): '90 Wolf 240GD, '06 G270 CDI.
Posts: 1010
1000
RE: Photo DIY- V-Belt Changes M110 Engine

Great and clean job as allwais, and very helpfull. BTW have you ever think of consolidate all of your DIY treads in one and ask Mr. Dutch to make it stick, sometimes it is hard to find some.
#131717 - in reply to #131711
Top of the page Bottom of the page
« View previous thread :: View next thread »
Page 1 of 1 1
Forum Jump :
All times are EST.  The time is now 3:25:43 AM.

Execution: 0.219 seconds, 93 cached, 9 executed.